Proudly Canadian
Contact Us
Product has been added to your cart.
Back Upright Attachment
  1. Home
  2. /
  3. All Products
  4. /
  5. Strength Equipment
  6. /
  7. Cable Machines
  8. /
  9. Back Upright Attachment

Back Upright Attachment

-

IMPORTANT: This version is only compatible with the original version of the Plate Loaded Cable Tower – purchased prior to Nov 22, 2023, or with the current version of the Weight Stack Cable Tower. Add to either of these products to mount attachments at the back, or to drastically increase stability when in use as Cable Tower Squat Stands. If you want an upright compatible with the Plate Loaded Cable Tower 2.0, use the Cable Tower Upright 2.0.

FEATURES • Only compatible with original versions of Cable Towers – not compatible with new Plate Loaded Cable Tower 2.0 or Weight Stack Cable Tower 2.0 • 80.9″ height • 15.1lb weight • Black powder coat • Rack attachment compatible • Hardware included

$79.99

In stock

     SHIPS FROM CALGARY & TORONTO

     TRUSTED SINCE 2010

     EXCELLENT WARRANTY

   SHIPS FROM CALGARY & TORONTO
   TRUSTED SINCE 2010
   EXCELLENT WARRANTY

Add stability, versatility, and better functionality to
your Cable Tower with the Rear Upright Attachment.

Want to show off your marvellous bumper plate collection on the back of your Cable Tower, while having unrestricted use of every single pulley height option?

Or maybe you just want to add some stability to a pair of Cable Towers, so you can use the back as a set of squat stands. With the Rear Upright Attachment, you can make it happen!

Benefits of the Rear Upright Attachment

  • RACK ATTACHMENT COMPATIBLE
    Just when you thought our towers couldn’t get any better… this rear upright attachment accepts BOS power rack attachments. Since this is only one upright, the Lever Arms (and any other attachment that needs two uprights) are obviously a no-go. But, you can mount a Y-Dip Attachment for a juicy upper body superset, or a couple pair of Plate Pegs to store your weight plates. And if you’re REAL crafty, you might even attach a Belt Squat Rack Attachment off it for a sick quad pump — you rebel, you.
  • SQUAT STAND FUNCTIONALITY
    Where this piece really shines is when two cable towers are joined to form a Cable Tower Squat Stand. Without the rear upright attachment, a pair of towers is fairly well grounded but its stability and safety are definitely amplified with an upright at the back of each. And don’t forget: adding the rear upright attachment gives you unrestricted use of all 33 height settings for the pulley handles at the front while being able to squat (or bench!) using the back uprights as a set of squat stands — talk about AMAZING!
  • MORE STABILITY
    When the rear upright attachment is connected to a single Cable Tower, the entire unit becomes noticeably more stable. And although the universal bracket at the bottom needs to be removed to install it, you can still use the top bracket to mount it to a wall stud (or rack, if you’re feeling extra creative). Just loosely bolt the bracket to the wall, scoot the tower up to it, adjust the bracket height, secure the top bolt, then tighten it to the wall with a socket wrench.

Specs

BrandBells of Steel
Weight15.1lbs/6.8kg
Height80.9"/2,055mm
Length2.3"/60mm
Width2.3"/60mm
Hole Spacing2"/50.8mm
Hole Diameter5/8"
ColourBlack
MaterialSteel
CoatingPowder Coat
WarrantyLimited Lifetime

IMPORTANT: If installed on the Cable Tower with Weight Stacks, there isn’t enough room to use the Weight Stack Pin (sold separately).

Frequently Asked Questions

Menu