-
ImPRESSive leg gains await with the Leg Press Hack Squat Machine!
This compact 2-in-1 unit allows for leg presses and hack squats, so you can grow and strengthen your quads, hamstrings, glutes, and calves — all from the comfort of your home.
FEATURES • 2-in-1 machine • 87″ x 37.5″ footprint • 1,000lb capacity • 322lb weight • Black powder coat • 15.5″ loadable weight horns • Resistance band pegs • Ships unassembled
In stock
In stock
This compact 2-in-1 unit allows for leg presses and hack squats to grow and strengthen your quads, hamstrings, glutes, and calves — all from the comfort of your home.
| Brand | Bells of Steel |
| Total Weight | 321.87lbs/146kg |
| Sled Starting Weight | 55lbs/24.95kg |
| Total Length | 87"/2,210mm |
| Total Width | 37.5"/953mm |
| Total Height | 58.25"/1,480mm |
| Hack Squat Platform Length | 27.88"/708mm |
| Hack Squat Platform Width | 24.88"/632mm |
| Leg Press Footplate Width | 23.75"/603.25mm |
| Leg Press Footplate Length | 13.75"/349mm |
| Loadable Horn Length | 15.5"/394mm |
| Bearings or Rollers | Linear Ball Bearings |
| Coating | Black Powder Coat |
| Sled Weight Capacity | 1,000lbs/453.6kg |
| Warranty | 1 Year on Pads |
| 3 Years on Moving Parts | |
| Limited Lifetime on Frame |
IMPORTANT: Assembling the Leg Press Hack Squat Machine is challenging due to the weight and size of the boxes and components. Having a friend to help is strongly recommended.
Don’t let the compact size of this combo unit fool you. It boasts a huge 1,000-pound capacity. Five pairs of welded band pegs are included, so you can apply added tension around the weight horns with resistance bands to make the weight feel heavier at the top, where the load often feels too easy. Or, loop them reverse-style around the top frame to the weight horns to lighten the weight at the bottom of the leg press. Time to load up those weight plates, you beast 🐂
The Leg Press Hack Squat Machine is highly adjustable to accommodate lifters of many sizes. The leg press footplate and hack squat platform have four pop-pin adjustable settings, so you can find the most comfortable angle for your build and mobility. There are also three racking positions for improved starting positions whether you’re shorter, average, or taller in height. And provided your floor-to-shoulder height is 70 inches or less, you’ll be able to stand up fully on hack squats without cutting your reps short ✂
Like the Weight Stack Lat Pulldown Low Row Machine, this unit isn’t exactly cheap. But, consider the alternative: as separate machines, each would cost thousands… bringing your total cost to well over $4,000. Combining both into a single beastly machine also saves on steel, and a lighter machine means you pay less shipping fees — a huge win for the budget-constrained home gym enthusiast 💰
Assembling this machine is NOT for the faint of heart, but this unit has been made extra special. It ships disassembled, so unlike the Other Guys, you don’t need a forklift to unload it. Also, all hardware comes separated and clearly labeled — say whaaaaat?! Fair warning: expect a serious workout (we’d recommend recruiting a strong friend), but even if you’re doing it solo, just remember that THIS IS WHAT YOU TRAIN FOR 💪
The weight of the Leg Press Hack Squat Machine is 321.87lbs/146kg.
The starting (empty) weight of the sled on the Leg Press Hack Squat Machine is 55lbs/24.95kg.
The weight capacity of the Leg Press Hack Squat Machine is 1,000lbs/453.6kg.
The footprint of the Leg Press Hack Squat Machine is 87″/2,210mm length (hack squat plate at lowest height) by 37.5″/953mm width (safety handles rotated out). We recommend an additional 2-3 feet of space on each side of the machine for easier weight plate loading.
The dimensions of the Leg Press Hack Squat Machine are:
The loadable sleeve length of the weight horns on the Leg Press Hack Squat Machine is 15.5″/394mm.
To change to leg presses on the Leg Press Hack Squat Machine, switch the back pad to the hack squat platform, select your desired back pad angle, then flip up the leg press footplate and lock it in place.
To change to hack squats on the Leg Press Hack Squat Machine, flip down the leg press footplate, place the interchangeable back pad on the now-flipped-down footplate, and adjust the hack squat platform to your desired position.
30mm linear ball bearings are used on the Leg Press Hack Squat Machine.
No, there technically isn’t a height limit on the Leg Press Hack Squat Machine. However, if your floor-to-shoulder height is greater than 70 inches, you won’t be able to stand up fully on hack squats.
Only Olympic weight plates fit the weight horns and plate pegs on the Leg Press Hack Squat Machine.
The Leg Press Hack Squat Machine is covered under the following warranties: 1 year on the pads, 3 years on any moving parts, and a limited lifetime warranty on the frame. This warranty guarantees that these components will not break under normal use and protects against defects in material, function and workmanship for the specified periods.
CAI opted for the smaller unit since it was just for home use. But I am 6' 2" 120kg and have no problem using/fitting the machine. I ended up putting the machine together by myself and it was not bad at all but took about 4hrs. Machine is solid and well built. The rollers are a bit on the loud side but that is not an issue for me. It is nice that the foot plates are adjustable. My only complaint is I wish the handles came up higher. I find I have to reach for the handles and get out of position a bit in the hack squat setting. But overall great unit for the price!
HI Sheridan, Thank you for reviewing our leg press hack squat machine today. We are so glad you have enjoyed your new machine. As for the position of the handles, we thank you for that feedback as we look to make improvements for the future. We wish you the very best! Sincerely, Marcus & the BoS team
CAI had some issues with shipping damages which is weird due to the packaging, packaged extremely well. The BoS team took care of that issue quickly which was great. Took about an hour solo to assemble, instructions are pretty straight forward. I had 2 extra bolts and washers which appear to be the bolts for the guide rods which were already installed. Everything feels good, done multiple exercises multiple times. Very happy they decided to keep some sort of plate storage on it, huge bonus. I would buy this again. My only negative which might be a me problem plus a suggestion. I tried using the grip handles as a grip while doing leg press and it causes a bind with the sled movement. If I tighten the handles more they cannot be moved. In that breathe if there was a handle added somewhere near the butt pad I think that would solve my issue. Great product, get it!
HI Keith, Thank you so much for reviewing our leg press hack squat today. We are so glad that you have been overall pleased with this purchase. I will also make sure to pass along the suggestion of moving the handles to better facilitate grip while doing movements and thank you for this feedback. Sincerely, Marcus & the BoS team
SHIPS FROM CALGARY & TORONTO
TRUSTED SINCE 2010
EXCELLENT WARRANTY