Feast your eyes on the fabled 3″ x 3″ folding half rack with 5/8″ holes.
So sturdy. So customizable. So very much worth the financial sacrifice for a never-have-to-upgrade power rack. You know what they say though… buy once, cry once.
Scroll down as I take you through the magical journey of building your perfect power rack!
FEATURES • True 3″ x 3″ uprights • 5/8″ holes • 11-gauge steel • 1,000lb capacity • Powder coat • Stringers, anchors & hardware included • Ships unassembled
If you’ve got less room in your gym than in a can of sardines — and you’re PROUD of it — then this
folding half rack is your huge-PRs-in-tiny-spaces solution. *Teensy-weensy barbell set not included*
| Brand | Bells of Steel |
| Weight | +185lbs |
| Total Length (Depth) | 24.5" or 47.5” |
| Total Width | 49" |
| Total Height | 72, 84", 90", or 108" |
| Upright Specs | True 3" x 3" |
| Hole Size | 5/8" |
| Hole Spacing | 1" & 2" |
| Steel Thickness | 11-Gauge/2.9mm |
| Coating | Powder Coat |
| Weight Capacity | 1,000lbs |
| Warranty | Limited Lifetime |
IMPORTANT: Our Hydra series of power racks are true 3″ x 3″ tubing with 5/8″ holes, so only attachments made precisely for 76.2mm x 76.2mm uprights will fit.
Built with 11-gauge steel, this bad boy can handle the weight capacity needs of world-class lifters. You get even more stability than our Light Commercial Rack which means less shaking when racking your bar or while using attachments. Even if it’s not bolted down, you’ll feel that true #heavyweight status.
Trying to line up your j-cups perfectly can be a pain in the you-know-what. And unlike many of our competitors, we have lasered numbers every 1-2 holes to make adjustments a breeze. So you can easily change your j-cup height after your widow-maker squat set… because counting is HARD WORK when you can barely breathe.
If you’re one of those people who actually park your car in the garage and can’t fill your whole garage up with fitness equipment, the folding rack lets you have your cake and eat it too.
The 18″ version easily collapses inwards while the 41″ moves to the side.
No need to get the bandsaw out and rig up your own solution, the folding half rack includes the stringers and all hardware needed to easily and stylishly install your folding half rack.
(Hardware includes wall anchors and the 17mm wrench needed to install them)
The uprights on the Hydra 3″ x 3″ Folding Half Rack measure true 3″ x 3″, which is exactly 76.2mm x 76.2mm with 5/8″ holes.
*Remember that the front edges of the upright base plates extend by 2.5″, the uprights are 3″ deep, and the stringers add 1″ of depth — resulting in a total 24.5″ or 47.5″ depth.
The Hydra 3″ x 3″ Folding Half Rack weighs a minimum of 185lbs when the smallest uprights & cross-pieces are selected with no attachments.
When bolted securely to a wall with the rack’s feet firmly in contact with the floor, the Hydra 3″ x 3″ Folding Half Rack’s weight capacity is 1,000lbs.
The steel thickness on the Hydra 3″ x 3″ Folding Half Rack is 11-gauge/2.9mm.
Only attachments designed to fit true 3″ x 3″ uprights are guaranteed to fit on the Hydra 3″ x 3″ Folding Half Rack. Attachments for uprights that measure 75mm x 75mm (often labeled as 3″ x 3″ but are based on the metric system and are actually 2.95″ x 2.95″) will NOT fit on the Hydra rack.
To assemble the Hydra 3″ x 3″ Folding Half Rack, you need two 24mm wrenches (not included by default). Correctly sized box-end, adjustable & socket wrenches are suitable alternatives.
Covered under our Limited Lifetime Warranty guarantees that the Hydra 3″ x 3″ Folding Half Rack will not break under normal use, and protects against defects in material, function and workmanship.
SHIPS FROM CALGARY & TORONTO
TRUSTED SINCE 2010
EXCELLENT WARRANTY