Bells of Steel Folding Wall Mount Power Rack
  1. Home
  2. /
  3. All Products
  4. /
  5. Racks
  6. /
  7. Specialty Power Racks
  8. /
  9. Folding Wall Mount Power Rack – Narrow

Folding Wall Mount Power Rack – Narrow

If you’re tight on space in your garage gym the wall mounted folding squat rack is your ideal solution! Easily attaches to the wall and folds inwards as needed.

From: $469.99




Choose your Accessories

  • Plate Pegs - Pair

    Keep your weight plates tidy and easy to grab with this inexpensive plate storage solution.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • Spotter Arms Attachment - Pair

    Stay safe by attaching these heavy-duty Spotter Arms, or use as a secondary squat/bench station.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • Monolift Attachment - Adjustable

    The adjustable Monolift Attachment offers a space-saving and inexpensive monolift solution. UHMW plastic lined to preserve your barbell.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • Y Dip Bar Rack Attachment

    An easily adjustable, heavy-duty Y Dip Bar Rack Attachment.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.  Will fit standard Bells of Steel Power Racks.

  • Landmine Power Rack Attachment

    Twist, row, and press with this handy, compact Landmine Attachment. Compatible with all Bells of Steel Racks, Squat Stands & Yokes.

    Fits other racks with 5/8" holes with a width or le...

  • Lever Arms - Adjustable - Pair - Power Rack Attachment

    The adjustable Lever Arms create a space-efficient solution to developing upper body explosive strength. Add the Adjustable Pullup Bar Rack Attachment for even more versatility.

    Fits 2.3"...

  • Vertical Mount Barbell Holder - Single -Rack Attachment

    Save space and get even more use out of your power rack by attaching a Vertical Mount Barbell Holder on the front or back. Use this barbell holder to keep your gym tidy.

    Fits 2.3" x 2.3" ...

  • Cable Pulley

    Perform tricep pushdowns, lat pulldowns, low rows and more using this portable and inexpensive Cable Pulley.

    This cable pulley can be anchored to any rack or stand-alone pull-up bar.

  • Suspension Spotter Straps and Bodyweight System

    Quickly wrap the straps around any rack to add another level of protection. Includes a pair of handles for bodyweight exercises like push-ups, rows and dozens more.


    Out of stock

  • Roller J-Cups - Pair

    Our exclusive Roller J-Cups allow for easy bar placement adjusting.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • Nylon Sandwich J-Cups - Pair

    Our super strong Nylon Sandwich J-Cups will keep your bar in pristine condition.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • J-Cups - Pair

    Our triple padded J-Cups will protect your bar from every angle for years to come.

    Fits 2.3" x 2.3" uprights with 5/8" holes only.

  • Hanging Ab Straps

    Hanging ab straps make a great addition to your home gym.  Add the abs, without worrying about your grip.

In stock

The Folding Wall Mount Power Rack Is Perfect For Garage Gyms With Limited Space

I get it, your garage is TECHNICALLY for your car. But you know what’s better than a car garage? A garage GYM! Have the best of both worlds with this wall mounted folding squat rack.

A simple hinge and pin system allows you to quickly remove the pull-up bar after a workout, then fold the sides of the squat rack inwards against the wall to open up a massive amount of space. The bare steel pull up bar is ideal for kipping pull-ups as it offers a superior grip to powder coated finishes and less prone to tears.

Superior 1” spacing through the bench and pull zone, and 2” spacing above and below allow you to select the perfect height for your jcups, for precision lift offs that can make the difference between a good rep and a superb rep.

A large selection of accessories are available to add versatility and excitement to your workouts, such as lever arms and/or a monolift. Check out our rack attachments.


J-Cups IncludedTriple padded J-Cups come standard.
ColourBlack powder coat paint.
Weight Capacity600lbs / 272kg Static
DetailsLaser-cut numbers on the uprights.
Assembled Dimensions22 L x 47 W x 91 H inches 73lbs.
Shipping Box Dimensions70 x 10 x 5 inches 73lbs.
Tubing12 gauge 2.3 x 2.3”/60 x 60 mm 2mm
Holes5/8” holes with 1″spacing through the bench & pull zone, 2” spacing above

IMPORTANT: A 2” x 10” stringer (not included) must be tied into a minimum of 4 studs. – It is NOT recommended installing the Fold Back Rack on a wood, drywall, or metal stud wall without a stringer or additional support.

Warranty: Lifetime on structural welds and frame

Why would you choose a folding wall mounted squat rack instead of a power rack?

You’re tight on space Therefore, need something compact.
You do kipping pull-ups and you need an awesome, high pull-up bar that will reduce hand tears.


Power Rack
in action.

Customer Reviews
4.8 Based on 62 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • rack
  • quality
  • home gym
  • space
  • bells
  • price
  • steel
  • Things
  • Installation
  • folding rack

Folding Rack

The rack works fantastically, very sturdy and easy to fold and unfold. Five stars for the product. The instructions on the other hand.. the most recent video showing where to install the stringers is not at the right height for the rack if you assemble it according to the supplied drawings. The stringers end up being about 6" too high, so either you need to mount the arms higher or the stringers lower to finish the install.


Bells of Steel

Hi Levi, Thank you for taking the time to review our kettlebell today and for the 5 stars ! We are delighted to hear it has worked well for you and you have enjoyed using it. We also understand the instructions need some work, and therefore we have been working diligently to do so. Sincerely, Marcus & the BoS team

Anthony G.
Canada Canada

BOS folding rack

I wanted this rack but I didn’t like the idea of the wood 2x6 stringer on my wall. So I bought the Rogue stringers from Rogue and thought I would have to make some modifications to make it work. Turns out it they bolted right together without any modifications! I used the infinity spacing on the stringers. Now I have a BOS/Rogue folding rack

  • My Fitness Goal Is: Health
Bells of Steel Folding Wall Mount Power Rack - Narrow ReviewBells of Steel Folding Wall Mount Power Rack - Narrow Review

Bells of Steel

Hey Anthony, We are happy to hear you got the Folding Rack set up the way you like and thank you for the feedback on the stringers. Yours in strength, William & The BoS crew