Dead Bounce Conflict Plates
  1. Home
  2. /
  3. All Products
  4. /
  5. Weight Plates
  6. /
  7. Bumper Plates
  8. /
  9. Bumper Plates – Dead Bounce Conflict – lb

Bumper Plates – Dead Bounce Conflict – lb


These heavy duty, coloured commercial grade lb bumper plates have a thick steel bearing insert rings with a 3 anchor point system to prevent common bumper breakdowns.  Our top of the line bumpers are ideal for home and commercial use, at an excellent price.





Choose your Dead Bounce Conflict Plates


In stock


In stock


In stock


In stock

Dead Bounce Plates Set

Craft your own personalized Dead Bounce Conflict Plates Custom Set by choosing a minimum of 3 pairs, and get 10% off.

Commercial-grade quality, at a home gym price.

You train hard and your equipment should be able to go the distance, too. Our dead bounce bumper plates will keep you — and your equipment — safe by giving you the peace of mind to bail from a lift, while preserving your flooring. Ideal for recreational and competitive lifters alike who don’t want to break the bank! If you’re looking for competition-grade bumpers click here.


BrandBells of Steel
Pounds or KilogramsPounds
Weight Increments10/15/25/35/45/55
ThicknessVaries - See Images
Plate Diameter17.72"/450mm
Centre Hole Diameter2.01"/51mm
Inserts MaterialStainless Steel
Plate Material100% Virgin Rubber
Durometer Rating10 & 15lbs = 88
25-55bs = 85
Weight Tolerance1%
Warranty: 90 Days10lb & 15lb
Warranty: 1-Year25lb, 35lb, 45lb, 55lb

The Benefits of Dead Bounce Bumper Plates

Here are the top reasons why these bumper plates belong in your home gym.

  • Low-smell.
    Most lower-quality bumper plates use old recycled tires which retain much of their stinky rubber smell. Our bumper plates are made from brand-new, high-quality virgin rubber to keep your gym smelling fresh.
  • Ultra-durable.
    Our plates are designed to survive being dropped repeatedly. The rubber build is much thicker than just a coating and the hubs are thick stainless steel insert rings with a 3-anchor point system. This design locks in the centre hub, making them durable enough for competitive weightlifting gyms.
  • Shock-absorbing.
    Regular metal plates will cause more wear and tear on your equipment and flooring. Our bumper plates will add mileage to your barbell and platform by absorbing some of the impact while reducing noise, too.
  • Highly accurate.
    Cheap bumpers can be up to 10% off the claimed weight, causing you to put the wrong weight on the bar. Our bumper plates are accurate to +/- 1% of the claimed weight. No more second-guessing what’s on the bar — ever.
  • Slimmer design.
    Inferior 45-pound plates are 3.75 inches wide, which can limit your strength by crowding the bar. Our 45-pound plates are no wider than 3.15 inches, letting you comfortably load up to 440 pounds on the bar with room to spare. Never worry about bumper plates limiting your strength gains ever again.
  • Consistent training.
    Standard steel plates come in a variety of non-standardized diameters, so if you are doing any exercises pulling from the floor, such as deadlifts, or cleans, unless you have 45lb plates on each side you will be pulling from a deficit. Bumper plates are the same diameter regardless of their weight, so you can keep your training consistent.

  • Avoid injury.
    If you hesitate to dump a bad lift because you’re afraid of damaging your floor or equipment, you could get seriously hurt. Bumper plates give you peace of mind by taking any worry about damage completely out of the equation. They’re also the most frequently used for performing the Olympic Lifts – the snatch, clean and jerk — as well as supplementary movements such as power cleans and jerks. If these plates aren’t your thing, then be sure to check out our entire weight plate collection.

Customer Reviews
4.9 Based on 167 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • price
  • plates
  • purchase
  • option
  • improvement
  • feel
  • company
  • deadlifts
  • Bells Of Steel
  • bounce
Canada Canada

Rubber Missing

Great price and a big fan of B.o.S., however my bumper plate has rubber missing on the outer seal.

  • My Fitness Goal Is: Strength

Bells of Steel

Hi Elli, Thank you so much for review our dead bounce all black bumpers today. We are glad you have been a fan of us and these were priced just right. We are extremely sorry to hear about the missing outer seal on your bumpers and will reach out to you shortly to see what we can do. Yours in strength. Marcus & the BoS team

Jordan S.

Great bumper plates at a reasonable price

Fantastic build quality that meets my needs. I'm new to lifting, and wanted plates with some forgiving bounce that were a bit thicker for cross fit type exercises. I love the fleck colour as well - adds a pop of colour to my workouts! Odour is barely noticable, the plates were packaged nicely and have been a joy to use so far. The crumb rubber offers some added grip, and the finish is solid. 100% recommend if you're looking for crumb rubber.

Bells of Steel Bumper Plates – Dead Bounce Conflict – lb Review

Bells of Steel

Hi Jordan, Thank you for your review of our crumb bumpers today. We are glad this has been an asset to you and your training. We hope you continue to enjoy using it and we wish you the best! Yours in strength, Marcus & the BoS team