Home
/
All Products
/
Racks
/
Hydra
/
Hydra Attachments
/
Hydra Non-Storage Attachments
/
Lat Pulldown Attachment – Hydra

Lat Pulldown Attachment – Hydra

-

The Hydra Lat Pulldown Attachment gives your back muscles some much-needed love with pulldowns, rows, curls, pushdowns & more!

Adds 25″ of depth & 4″ of height. Compatible with our Hydra power racks & select racks that have true 3″ x 3″ uprights with 5/8″ holes.

FEATURES • 3 height options • 2-in-1 design • 70lb weight • Aluminum pulleys • Angled weight horns • Includes 2 bars • 500lb weight capacity • Ships unassembled

ATTENTION: Choose the Lat Pulldown that matches the height of your rack’s uprights (72-inch Lat Pulldown fits: 72-inch uprights, 72-inch uprights with flat foot & 72-inch upright with flat foot + name plate crossmember).

$629.99

Add to Cart

or customize your lat pulldown

SHIPS FROM CALGARY & TORONTO

TRUSTED SINCE 2010

EXCELLENT WARRANTY

SHIPS FROM CALGARY & TORONTO

TRUSTED SINCE 2010

EXCELLENT WARRANTY

Invisible Lat Syndrome (ILS) is a serious illness — don't be a victim.

Bumping into strangers for no reason? Unable to walk through doorways without turning sideways? Tired of carrying around imaginary suitcases for hours on end?

You don’t have to struggle with ILS in silence… the Hydra Lat Pulldown Attachment can help.

Benefits of the Hydra Lat Pulldown Attachment

SPACE-SAVING DESIGN
The 2-in-1 design of the Hydra Lat Pulldown Attachment offers lat pulldowns and cable rows using the same machine. Rotate between the two seamlessly, without needing to rejig the cables at all. And instead of conquering yet another section of your basement or garage, this add-on simply mounts to the back of your Hydra power rack — adding just 25″ of depth to your existing rack (not including weight plates).
BACK TRAINING & MORE!
With a typical power rack, you’re limited to barbell rows & pull-up variations to train your back muscles. But with the Hydra Lat Pulldown Attachment, the gates of Lat Heaven swing wide open with the chorus of a thousand baby angels. Thanks to the dual cables, curls, pushdowns, face pulls & shoulder raises are within your grasp. And with an ankle strap, glute side kicks & kickbacks will help you build a set of sculpted cheeks that even Hercules would envy.
AFFORDABLY PRICED
The shining feature of the Hydra Lat Pulldown Attachment is its price. You’ll save some BIG bucks compared to the Lat Pulldown Low Row Machine and when bundled with any Hydra power rack, you’ll save even more! This is great news because you’ll immediately want to spend those savings on an extensive collection of cable attachments 😉

Specs

Brand	Bells of Steel
Weight	70-73lbs/32-33kg
Length (Depth)	Adds 25"/635mm
Width	43"/1092mm
Height	Adds 4"/102mm
Pull Ratio	1:1
Pulley Material	Aluminum
Steel Thickness	11-Gauge
Sleeve Diameter	1.9"/48mm
Loadable Sleeve Length	10.9"/276mm
Coating	Black Powder Coat
Machine Type	Plate-Loaded
Total Weight Capacity	500lbs
Warranty	Limited Lifetime

IMPORTANT : The Hydra Lat Pulldown Attachment is ONLY compatible with our Hydra racks & must match the height of your rack uprights (72″, 84″, or 90″) to fit correctly.

More awesome features on the Hydra Lat Pulldown Attachment

Angled Weight Horns

The upward angle of the weight horns keeps your weight plates from jumping ship like a crew of pirates who are fresh out of rum. And although the steel tubing sleeves are too small for Olympic-sized collars, our axle collar clips will fit just right (not that you really need them though!)

Non-Slip Tread Plate

The large sloped opening of the footplate ensures that the cable moves freely without the risk of it stripping. And with the diamond-patterned texture on the footplate, your feet will have a solid grip. So, you never have to worry about an accidental slip while lighting up your lats 🔥

Leg Pad Included

I get it, you’ll be maxing out that 500lb capacity in no time. But instead of flying out of your seat during your lat pulldowns, you’ll stay locked down in place thanks to the supplied leg pad. Just slide it onto your uprights and secure the locking pins — no ejecto-seato for you, amigo!

Aluminum Pulleys

The velvety-smoothness of this lat pulldown attachment gives peanut butter a run for its money. With its sleek aluminum pulleys, you get an upgraded aesthetic and better durability than nylon. Paired alongside the hefty guide rods, that commercial-grade glide is felt with every ~~bite~~ rep.

Frequently Asked Questions

Without weight plates loaded on the sleeves, the Hydra Lat Pulldown Attachment adds 25″ of depth to your rack. Having 45lb plates loaded on the weight horns, with 2″ of space between the plates and a rear wall will require 35″ from the back uprights of your rack.

Including the extending parts of the upper pulleys, the Hydra Lat Pulldown Attachment adds 4″ of height to your rack.

The Hydra Lat Pulldown Attachment weighs between 70-73lbs, depending on the height that is chosen.

The loadable sleeve length on the Hydra Lat Pulldown Attachment is 10.9″/276mm.

The total weight capacity on the Hydra Lat Pulldown Attachment is 500lbs.

It’s possible. The Hydra Lat Pulldown Attachment mounts to a same-sized power rack on two spots: the lower crossmember (requires 5/8″ holes that are 6″ apart, centre-on-centre) and the upper crossmember (requires vertical 5/8″ holes that are also 6″ apart (centre-on-centre). If your rack doesn’t have these features, this attachment will NOT fit.

Yes, the Hydra Lat Pulldown Attachment is compatible with Rogue Monster Lite power racks. However, you MUST buy a Bells of Steel 43-inch crossmember (sold separately) to replace the upper crossbeam of your RML rack. This is required, as RML racks do not have vertical holes on its upper crossmember for the Hydra Lat Pulldown Attachment to mount onto. Please note, Bells of Steel is NOT affiliated with Rogue Fitness in any way, we just get this question a lot.

The pulleys on the Hydra Lat Pulldown Attachment are aluminum.

The weight horns of the Hydra Lat Pulldown Attachment fit 2″ Olympic weight plates.

The pull ratio on the Hydra Lat Pulldown Attachment is 1:1, meaning that 10 pounds will feel like 10 pounds.

The Hydra Lat Pulldown Attachment is shipped in 2 separate boxes.

To assemble the Hydra Lat Pulldown Attachment, you’ll need:
• 17mm box end wrench (not included)
• 17mm socket & ratchet (not included)

The Hydra Lat Pulldown Attachment is covered under our Limited Lifetime Warranty, which guarantees that it will not break under normal use and protects against defects in material, function and workmanship.

Customer Reviews

4.6 Based on 13 Reviews

5 ★

69%

9

4 ★

23%

3

3 ★

8%

1

2 ★

0%

0

1 ★

0%

0

Customer Photos

90 Inch Lat Pulldown - Hydra - Customer Photo From Guy Stockton

90 Inch Lat Pulldown - Hydra - Customer Photo From Christian Mazza

Hydra Lat Pulldown Attachment - Customer Photo From Sean

Hydra 90 Inch Lat Pulldown - Customer Photo From Jonathan Montgomery

Write a Review Ask a Question

Reviews
Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

GS

04/25/2024

Guy S.

US

Built to last

I am so happy with this addition. It’s as as sturdy and smooth operation as any commercial lat pull-down machine.

My Fitness Goal Is: At 65 continue to hit PRs.

04/25/2024

Bells of Steel

HI Guy, Thank you so much for the review of our Hydra lat pulldown machine. We are so glad you have been pleased with this piece and we hope to see you again soon! Yours in strength, The BoS team

CM

02/29/2024

Christian M.

US

Upleveled my half rack

I’m very impressed with the added functionality to my Rogue Monster Lite half rack. I didn’t enjoy the cheap pulley systems with the swaying weight pins — it never felt secure and setup was too long. This fixes all those issues. My only knock on this product, was the lack of instructions and/or clear illustrations in the manual

My Fitness Goal Is: Mostly powerlifting

03/04/2024

Bells of Steel

HI Christian, Thank you so much for review our hydra lat pulldown today. We are so glad you have enjoyed this piece and it has been a valuable addition to your home gym. We wish you the best, The BoS team

<
<<
1
2
3
4
5
6
7
>>
>

90 Inch Lat Pulldown - Hydra quantity	90 Inch Lat Pulldown - Hydra	$629.99 Out of stock: "90 Inch Lat Pulldown - Hydra - Box 1" does not have sufficient quantity in stock.
84 Inch Lat Pulldown - Hydra quantity	84 Inch Lat Pulldown - Hydra	$629.99
72 Inch Lat Pulldown - Hydra quantity	72 Inch Lat Pulldown - Hydra	$629.99 Out of stock: "72 Inch Lat Pulldown - Hydra - Box 1" does not have sufficient quantity in stock.