Twist, row and press with this handy, compact Landmine Attachment.
Designed for 2.3″ x 2.3″ uprights with 5/8″ holes.
Twist, row and press with this handy, compact Landmine Attachment.
Designed for 2.3″ x 2.3″ uprights with 5/8″ holes.
In stock
Get the most out of your power rack space by adding this inexpensive and versatile tool to build explosive power and rotational strength.
Weight | 2.3kg/5lbs |
Sleeve Diameter | 47.6mm/1.9” |
Sleeve Length | 178mm/7" |
Coating | Black Powder Coat |
Lining | UHMW Plastic |
Max Capacity | 143kg/315lbs |
Shipping Box Dimensions | 11" x 5" x 4" |
Warranty | Limited Lifetime Warranty |
IMPORTANT: Our Landmine Attachment should fit on any rack that has 5/8” holes and an upright tubing no greater than 3” in either width OR length. Please note that you’ll likely have to source your own bolt & locking nut if using on a non-Bells of Steel product.
It has 47.6mm/1.9” handle diameter, 406.4mm/16” total width, and sits 737mm/29″ off the rack.
It weighs 2.3kg/5lbs.
It has a black powder coating.
Yes, the top 2” inside the Barbell Holder has a UHMW plastic liner to help protect your bar from scuffs.
The Landmine Attachment should fit on any rack that has 5/8″ holes and an upright width or length no greater than 3”.
Only Olympic barbells (2” sleeve diameter) will fit snugly in the Landmine.
It has a 143kg/315lb weight capacity.
In the box, you’ll find the following pieces: Landmine sleeve, mounting bracket with bolt and nut, mounting pin with locking nut, and Allen key.
To assemble it, you’ll need:
• Allen key for locking nut (included)
Covered under our Limited Lifetime Warranty guarantees that the Landmine Attachment will not break under normal use, and protects against defects in material, function and workmanship.