Proudly Canadian
Contact Us
Product has been added to your cart.
  1. Home
  2. /
  3. All Products
  4. /
  5. Gym Accessories
  6. /
  7. Gym Storage
  8. /
  9. Gym Storage Promo
  10. /
  11. Barbell Holder Rack Attachment – Hydra – Pair

Barbell Holder Rack Attachment – Hydra – Pair

-

Store a barbell above your power rack, converting it into a useable pull-up station — for smarter storage AND a bigger back.

The Hydra Barbell Holder Rack Attachment is made to fit perfectly on true 3″ x 3″ tubing with 5/8″ holes.

FEATURES • 3D-printed • Fits up to 32mm bars • 0.44lbs weight • Black colour • 500lb capacity • PLA filament • Sold in pairs

$19.99

In stock

     SHIPS FROM CALGARY & TORONTO

     TRUSTED SINCE 2010

     EXCELLENT WARRANTY

   SHIPS FROM CALGARY & TORONTO
   TRUSTED SINCE 2010
   EXCELLENT WARRANTY

Store a barbell above your rack, turning it into a useable pull-up bar — for smarter storage AND a bigger back.

Psssst… the area above your rack also makes a GREAT hiding spot (just in case you didn’t get permission from your spouse to buy that new bar) 😉

Benefits of the Hydra Barbell Holder Rack Attachment

  • SMART BARBELL STORAGE
    If your home gym is the size of a broom closet, you’re in luck. The Hydra Barbell Holder Rack Attachment stores a single bar on top of your power rack, which is great when you don’t have enough floor space for a 9 Barbell Holder or an unused wall to fit a 3 Barbell Wall Rack. A word of advice, though — mount it near the front or rear of your rack for easy access. Installing it in the middle might seem wise until you spend 99% of your overhead pressing strength to maneuver it between your upper crossbeams, just to find out you put a hole in your ceiling (been there, done that).
  • USE FOR PULL-UPS
    Wish you could legally marry do more with your Barenaked Powerlifting Bar than just squat, bench and deadlift? Now you can. Once mounted to your rack with bolts or 5/8″ band pegs, the Hydra Barbell Holder Rack Attachment is sturdy enough to do chin-ups and pull-ups directly off your stored barbell. So, you can do the Big 3 AND pull-ups with your favourite bar… and when you’re ready to walk it down the aisle, we’ll be there with you *sniffles*
  • FITS MANY BARS & RACKS
    The Hydra Barbell Holder Rack Attachment fits the true 3″ x 3″ tubing of our Hydra racks and accepts 5/8″ diameter mounting hardware. But if you want to mount it on smaller tubing, don’t let us hold you back — just fill the empty space with a shim for a snug fit. Olympic barbells with a shaft diameter measuring up to 32mm will fit. So whether you’re reppin’ a slim 28mm weightlifting bar or a thiccc 32mm Buffalo bar, the deep grooves of the Hydra Barbell Holder Rack Attachment will hold it tight in a tender, loving embrace.

Specs Per Holder

Brand Bells of Steel
Weight 0.44lbs/0.2kg
Total Length 3.6"/91mm
Total Width 3"/76mm
Total Height 5"/127mm
Channel Width 1.4"/35mm
Channel Height 1.5"/38mm
Colour Black
Material PLA Filament
Hardware Not Included
Total Weight Capacity 500lbs/227kg
Warranty 1-Year

IMPORTANT: Please avoid doing butterfly/kipping pull-ups from a barbell in the Hydra Barbell Holder Rack Attachment, as upward motion could cause it to jump out of the holder and cause injury.

Frequently Asked Questions

  • What is the weight of the Hydra barbell holder rack attachment?

    The weight of the Hydra barbell holder rack attachment is 0.44lbs/0.2kg per holder.

  • What are the dimensions of the Hydra barbell holder rack attachment?

    The dimensions of the Hydra barbell holder rack attachment are:

    • 3.6″/91mm length
    • 3″/76mm width
    • 5″/127mm height
    • 1.4″/35mm channel width
    • 1.5″/38mm channel height

  • What is the weight capacity of the Hydra barbell holder rack attachment?

    The weight capacity of the Hydra barbell holder rack attachment is 500lbs/227kg total, or 250lbs/113.4kg per holder.

  • What material is used to make the Hydra barbell holder rack attachment?

    The material used to make the Hydra barbell holder rack attachment is PLA filament.

  • What type of barbells will fit in the Hydra barbell holder rack attachment?

    Olympic barbells will fit in the Hydra barbell holder rack attachment, including select specialty barbells like the Buffalo Bar. However, barbells that aren’t at least as long as the width of your power rack will NOT fit and bars like the Arch Nemesis Bar will NOT fit due to their curved design and large sleeve diameter.

  • What barbell shaft diameters will fit in the Hydra barbell holder rack attachment?

    The barbell shaft diameters that fit in the Hydra barbell holder rack attachment are any diameter up to 32mm. Please note that as the shaft diameter gets smaller, your barbell will move around more inside the channel when doing pull-ups from it.

  • What length of barbell shaft will fit in the Hydra barbell holder rack attachment?

    The length of barbell shaft that fits in the Hydra barbell holder rack attachment depends on the total width of your power rack. Most Olympic bars have a shaft length of at least 51″, and most power racks are no wider than 49″. This means most barbells will fit in the barbell holder rack attachment without the collars pressing against the upper crossmembers of your power rack.

  • What is the best hardware to mount the Hydra barbell holder rack attachment?

    The best hardware to mount the Hydra barbell holder rack attachment is 5/8″ diameter bolts, detent (locking) pins or band pegs. If you want maximum stability, use bolts. If you want to be able to easily move the barbell holder rack attachment, use detent (locking) pins or band pegs.

  • What is the warranty on the Hydra barbell holder rack attachment?

    The warranty on the Hydra barbell holder rack attachment is 1 year. This guarantees that it will not break under normal use and protects against defects in material, function and workmanship.

Menu