Skip the expensive specialty bar and transform your Olympic barbell into a Camber Bar in seconds!
FEATURES • Sold in pairs • 36.16lb combined weight • Fits Olympic barbells • 12.25″ loadable length • Bushings + bearings • Collars not included
-
Skip the expensive specialty bar and transform your Olympic barbell into a Camber Bar in seconds!
FEATURES • Sold in pairs • 36.16lb combined weight • Fits Olympic barbells • 12.25″ loadable length • Bushings + bearings • Collars not included
In stock
In stock
Just in case they weren’t already challenging enough.
Brand | Bells of Steel |
Weight | 18.08lbs/8.2kg |
Total Height | 20.75"/527mm |
Total Width | 16"/406mm |
Loadable Sleeve Length | 12.25"/311mm |
Opening For Barbell | 2.06"/52mm |
Sleeve Diameter | 1.97"/50mm |
Bushings or Bearings | Both |
Coating | Black Powder Coat |
Weight Capacity | See FAQ |
Weight Tolerance | 3% |
Warranty | Limited Lifetime |
IMPORTANT: Locking bolt may cause wearing of barbell sleeves over time. For user and equipment safety, we recommend using barbell collars (not included by default) on the sleeves of the Camber Bar Attachment.
The weight of the Camber Bar Attachment is 18.08lbs/8.2kg, for a combined weight of 36.16lbs/16.4kg.
The weight capacity of the Camber Bar Attachment depends on the weight capacity of the barbell they’re used with. Ensure that you don’t exceed it, and remember to factor in the combined weight of the attachments, too.
The loadable sleeve length of the Camber Bar Attachment is 12.25″/311mm.
Both — the Camber Bar Attachment uses 2 brass bushings and 2 ball bearings.
Only Olympic weight plates will fit the sleeves of the Camber Bar Attachment.
It depends. Lifters with large frames and/or a tall weight bench might have 1-2 inches of clearance between the floor and loaded 45lb plates. Lifters with smaller frames and/or a short weight bench will likely find that their 45lb plates touch the floor at the bottom of each rep.
Barbell sleeves diameters up to 1.97″/50mm will fit the Camber Bar Attachment.
The Camber Bar Attachment uses a black powder coat.
The Camber Bar Attachment is covered under our Limited Lifetime Warranty, which guarantees that it will not break under normal use and protects against defects in material, function and workmanship.