Attaches to the front of your rack for all types of cable work from both top and bottom pulleys.
Fits the 84.5″ Light Commercial & Residential Rack, Brute Rack, and Utility Rack.
-
Attaches to the front of your rack for all types of cable work from both top and bottom pulleys.
Fits the 84.5″ Light Commercial & Residential Rack, Brute Rack, and Utility Rack.
In stock
Attaches to the front of your rack to allow for cable cross workouts and all forms of pulling work from both top and bottom pulleys only.
Weight | 49.9kg/110lbs |
Length (depth) | 660.4mm/26″ |
Width | 1016mm/40″ |
Height | 2146.3mm/84.5″ |
Coating | Black Powder Coat |
Max Capacity | 72.6kg/160lbs |
Shipping Box Dimensions | 88" x 13" x 7" |
Warranty | Limited Lifetime Warranty |
IMPORTANT: Since there is no adjustable feature to this rack attachment, the Cable Crossover can only be operated from the top or bottom positions.
• 660.4mm/26″ length (depth)
• 1016mmmm/40″ width at its widest
• 2146.3mm/84.5″ height
It weighs 49.9kg/110lbs.
It has a black powder coating.
Each Lever Arm has 229mm/9” of loadable sleeve length for weight plates.
No, it’s very unlikely that it will fit. The Cable Crossover Attachment is designed to perfectly fit our racks with 2.3” x 2.3″ / 60mm x 60 mm uprights and 5/8” holes.
It has a 72.6kg/160lb weight capacity per side.
Due to the slide-on adapters, the Cable Crossover Attachment can fit 1″ & 2″ weight plates.
In the box, you’ll find the following pieces: two (2) guide rails, two (2) lower arm brackets, two (2) handles, two (2) slides with 2″ adapters, four (4) pulleys, two (2) upper cross-members, one (1) single upper beam, and hardware (bolts, washers, nuts).
To assemble it, you’ll need:
• 24mm box end wrench
• 24mm socket & ratchet
• 17mm box end wrench
• 17mm socket & ratchet
Covered under our Limited Lifetime Warranty guarantees that the Cable Crossover Attachment will not break under normal use, and protects against defects in material, function and workmanship.