bells of steel Rackable Trap / Hex Bar
  1. Home
  2. /
  3. All Products
  4. /
  5. Barbells
  6. /
  7. Specialty Barbells
  8. /
  9. Industrial Rackable Trap / Hex Bar

Industrial Rackable Trap / Hex Bar


The Industrial Rackable Trap /Hex Bar is one of the most versatile barbells to have in your gym. Longer, rotating sleeves and a built-in deadlift jack with a rust-resistant finish.

FEATURES • 1.1″ diameter • 85.25″ length • 80lbs weight • Rotating sleeves • Black Cerakote finish • Aggressive knurling • Titanium-plated sleeves

This product is being DISCONTINUED, so grab yours now before they’re gone for good!


In stock

Frequently Bought Together
Industrial open trap
This item: Industrial Rackable Trap / Hex Bar

In stock

1 × Spring Collars - Pair
Choose Your Spring Collars Pair




The Rackable Trap / Hex Bar is one of the greatest innovations in
strength training equipment — now with an Industrial colour twist.

Benefits of the Rackable Trap / Hex Bar

  • BUILT-IN JACK: A feature rarely seen on a home gym hex bar, and is usually reserved for insanely expensive models — the Rackable Trap / Hex Bar has a built-in bar jack. By rotating the bar vertically like a lever until it’s sitting on the feet of the jacks, the weight plates end up a few inches off the floor. This allows you to add and remove plates with total ease.

  • RACKABLE: Compared to our regular Trap Bar, the Industrial Rackable Trap / Hex Bar has much more space between the collars. This allows it to sit perfectly across your j-cups when racked. The wider distance also allows the weight plates to rest on rubber mats when used on an average 8-foot wide lifting platform.

  • RUST-RESISTANT FINISH: The shaft of the Rackable Trap / Hex Bar is coated with a rust-resistant black cerakote finish. Not only does this black-gold combo give the look of a premium bar, it helps minimize the build-up of rust — the main drawback of our bare-steel Barenaked Powerlifting Bar.

  • OPEN-ENDED FRAME: This clever design offers a few key benefits over the traditional, closed-frame design.  The most important is having access to way more movements than before. By opening up the front end of the rackable trap / hex bar, you can use your trap bar for split squats, Romanian deadlifts, weighted carries, lunges, and more, while still being perfectly balanced for your deadlifts and shrugs.


Weight80lbs / 36.3kg
Handle Diameter1.1" / 29mm
Total Length85.25″ / 2,165mm
Loadable Sleeve Length17.1″ / 434mm
Knurling MarksN/A
Shaft FinishBlack Cerakote
Sleeve FinishTitanium Plated
Tensile Strength100,000 PSI
Max Capacity882lbs / 400kg
WarrantyLimited Lifetime Warranty

IMPORTANT: Please note that the Rackable Trap / Hex Bar has more aggressive knurling and is significantly heavier and wider than our regular Trap Bar. To learn more about the differences between this and our regular Trap Bar, check out Regular vs Industrial Trap Bar Comparison.